Casimir's Effect
Short answer: In 1948 the Dutch physicist Hendrik Casimir predicted that two uncharged, parallel conducting plates in a vacuum would be pushed together. In quantum theory, the vacuum is not empty but full of fluctuating electromagnetic fields.
The plates limit which field modes fit between them, so the pressure outside is greater than the pressure inside. The force is tiny and only matters at very small separations. Steven Lamoreaux measured it directly in 1997, at gaps of 0.6 to 6 micrometers, agreeing with theory to within about 5%. Engineers now consider it in the design of micromachines (MEMS). The dynamic version, which is what the Reel describes, was proposed by Gerald Moore in 1970. A mirror moving at a significant fraction of the speed of light could convert virtual photons into real, detectable ones. Moving a physical mirror that fast isn't practical. In 2011, Christopher Wilson and colleagues at Chalmers University of Technology in Sweden instead used a superconducting circuit, published in Nature. A SQUID (superconducting quantum interference device) changed the electrical length of a transmission line about 11 billion times a second, at an effective speed of a few percent of light speed. They detected microwave photons emitted in correlated pairs, the predicted signature, and called it the first observation of the dynamical Casimir effect. The footage shows two metal strips hanging side by side and drawing together. That's a visible-scale stand-in for illustration: real Casimir forces are only measurable at micrometer gaps.
What should you know about Casimir's Effect?
Quick facts. Each one stands alone and has a stable ID you can cite.
Hendrik Casimir predicted the Casimir force in 1948.
The dynamical Casimir effect was first observed in 2011 in a superconducting circuit.
Video transcript: Casimir's Effect: Photons From Empty Space
DID YOU KNOW? The dynamic Casimir effect is a quantum phenomenon where accelerating or moving mirrors, or boundaries in a vacuum can create real particles, such as photons, from the vacuum's fluctuating electromagnetic field. Unlike the static Casimir effect, which produces a force between stationary conducting plates due to vacuum fluctuations, the dynamic version involves changing boundary conditions rapidly enough that virtual particles become actual, detectable particles. NOW YOU KNOW!
Burned-in captions, read frame by frame (see transcript.md) · 24.5s Reel ·
The write-up
Photons from empty space. In 2011 a superconducting circuit turned vacuum fluctuations into real light.
- Exhibit A
The static effect
Casimir predicted in 1948 that uncharged conducting plates in a vacuum would attract.
- Exhibit B
Measured
Lamoreaux measured the force in 1997 at gaps of 0.6 to 6 micrometers, within about 5% of theory.
- Exhibit C
Moving mirrors
In 1970, Moore proposed that a mirror moving near light speed could turn virtual photons into real ones.
- Exhibit D
A circuit as mirror
Chalmers researchers used a SQUID to change a circuit's electrical length at a few percent of light speed.
- Exhibit E
Photons in pairs
They detected photons emitted in correlated pairs, the signature of the dynamical effect.
Questions people ask about Casimir's Effect
When did Hendrik Casimir predict the Casimir force?
With conducting plates in a vacuum.
Source: Write-up · Exhibit A (The static effect) · arXiv: Wilson et al., Observation of the Dynamical Casimir Effect in a Superconducting Circuit (1105.4714); Wikipedia: Casimir effect
In the static Casimir effect, what happens to two uncharged parallel plates?
Pressure outside exceeds pressure between them.
Source: Write-up · Exhibit A (The static effect) · arXiv: Wilson et al., Observation of the Dynamical Casimir Effect in a Superconducting Circuit (1105.4714); Wikipedia: Casimir effect
Where was the dynamical Casimir effect first observed?
Published in Nature in 2011.
Source: Write-up · Exhibit B (Measured) · Lamoreaux (1997), Demonstration of the Casimir Force in the 0.6 to 6 μm Range, Physical Review Letters; Wikipedia: Casimir effect
What device stood in for the moving mirror?
It changed the circuit's electrical length.
Source: Write-up · Exhibit B (Measured) · Lamoreaux (1997), Demonstration of the Casimir Force in the 0.6 to 6 μm Range, Physical Review Letters; Wikipedia: Casimir effect
At what gaps did Lamoreaux measure the Casimir force?
In 1997.
Source: Write-up · Exhibit A (The static effect) · arXiv: Wilson et al., Observation of the Dynamical Casimir Effect in a Superconducting Circuit (1105.4714); Wikipedia: Casimir effect
Test Your Knowledge
All quizzes →5 questions, all from this case file. Answers are revealed instantly.
When did Hendrik Casimir predict the Casimir force?
- 1948
- 1905
- 1997
- 2011
Show the answer
Answer: A. 1948 With conducting plates in a vacuum. Source: Write-up · Exhibit A (The static effect) · arXiv: Wilson et al., Observation of the Dynamical Casimir Effect in a Superconducting Circuit (1105.4714); Wikipedia: Casimir effect
In the static Casimir effect, what happens to two uncharged parallel plates?
- They're pushed together
- They repel strongly
- They heat up
- Nothing at all
Show the answer
Answer: A. They're pushed together Pressure outside exceeds pressure between them. Source: Write-up · Exhibit A (The static effect) · arXiv: Wilson et al., Observation of the Dynamical Casimir Effect in a Superconducting Circuit (1105.4714); Wikipedia: Casimir effect
Where was the dynamical Casimir effect first observed?
- Chalmers University, Sweden
- CERN, Switzerland
- MIT, USA
- Tokyo University, Japan
Show the answer
Answer: A. Chalmers University, Sweden Published in Nature in 2011. Source: Write-up · Exhibit B (Measured) · Lamoreaux (1997), Demonstration of the Casimir Force in the 0.6 to 6 μm Range, Physical Review Letters; Wikipedia: Casimir effect
What device stood in for the moving mirror?
- A SQUID
- A laser
- A vacuum pump
- A prism
Show the answer
Answer: A. A SQUID It changed the circuit's electrical length. Source: Write-up · Exhibit B (Measured) · Lamoreaux (1997), Demonstration of the Casimir Force in the 0.6 to 6 μm Range, Physical Review Letters; Wikipedia: Casimir effect
At what gaps did Lamoreaux measure the Casimir force?
- 0.6 to 6 micrometers
- 1 to 10 meters
- 1 to 2 centimeters
- Light-years
Show the answer
Answer: A. 0.6 to 6 micrometers In 1997. Source: Write-up · Exhibit A (The static effect) · arXiv: Wilson et al., Observation of the Dynamical Casimir Effect in a Superconducting Circuit (1105.4714); Wikipedia: Casimir effect
Cite this case file
Easterling, Marcus. "Casimir's Effect." The Detail Department (DetailEnjoyer), case file DD-618, last updated Jul 20, 2025. https://detailenjoyer.com/case/casimirs-effect/
Permalink: https://detailenjoyer.com/case/casimirs-effect/ · Last updated
Cite a single fact by its ID, for example DD-618-F01 → https://detailenjoyer.com/case/casimirs-effect/#DD-618-F01

